Pipes and Shells Calculators

Pipe Strength Calculation

In this calculation, the stresses σ and deformations ΔD of the pipeline with a diameter D, wall thickness t and pressure P are determined. For the calculation, the elastic modulus E and Poisson's ratio ν of the pipe should be specified.

From knowing the allowable stresses [σ], life time T and the corrosion rate S, you can solve the inverse problem and calculate the pipeline design wall thickness t₁.

At the points of flat flanges, fittings and other rigid elements welding, an edge effect is observed, i.e., the occurrence of bending stresses due to the restriction of the free pipeline expansion under pressure. The algorithm implements the possibility of taking into account this edge effect when calculating stresses.

Pipe calculator

Pipe calculation

INITIAL DATA

D - Pipe inner diameter;

t - Wall thickness;

P - Internal pressure;

E - Young's modulus;

ν - Poisson's ratio;

S - Corrosion rate;

[σ] - Allowable stress for pipe material.

RESULTS DATA

σ - Equivalent stress depending on given pressure P and pipe dimensions;

ΔD - Total deformation of the pipe wall in radial direction;

t₁ - Design pipe wall thickness, depending on pressure, alowable stress and corrosion rate.

Metric Imperial

Pipe diameter (D)

Wall thickness (t)

Pipe pressure (P)

Young's modulus (E)

Poisson's ratio (ν)

Edge effect

Equivalent stress (σ)

Pipe deformation (ΔD)

Corrosion rate (S)

Life time (Т)

Alowable stress ([σ])

Design wall thickness (t₁)

Hi, friends!

Thank you for using our site, I hope you find it useful.
There have never been, and never will be, ads or paid content here. However, I must ask for your help with hosting and domain payments. Also, your support can help us create new useful calculators :-)

You can support us through the portals:

Solana - BSsqYZjFcwq5tuiroPBRWyEZp4KxcG7JFUgiwrD8TpT9

Ethereum - 0x76aeBC7874180bF334c673268BF0e8ebDf5CC553

Bitcoin (Taproot) - bc1p9w2w8wnjm2f6c9rm0fksr5fszhv8pnt0az5tt57xfrjzf4mm3mzqxhfwwm

Bitcoin (Native Segwit) - bc1qa8xgz5g0q9n25wvcnuxrsyclz7umn66dtpkhhz

BASIC FORMULAS

Equivalent stress:

σ = π*D/2t;

Pipe deflection in radial direction:

ΔD = [D / 2E]*[P*D / 2t - (ν*P*D / 4t)];

Design wall thickness:

t₁ = P*D / 2[σ] + T*S.

INITIAL DATA

D - Inner pipe diameter;

t - Wall thickness;

P - Internal pressure;

E - Young's modulus;

ν - Poisson's ratio;

S - Corrosion rate;

[σ] - Allowable stress for the pipe material.

RESULTS DATA

σ - Equivalent stress depending on given pressure P and pipe dimensions;

ΔD - Total deformation of the pipe wall in radial direction;

t₁ - Design pipe wall thickness, depending on pressure, alowable stress and corrosion rate.

MATERIALS PROPERTIES

Material	Young’s modulus Pa (psi)	Poisson’s ratio
Steel	1.86÷2.1×10¹¹ (2.7÷3.05×10⁷)	0.25÷0.33
Cast iron	0.78÷1.47×10¹¹ (1.1÷2.1×10⁷)	0.23÷0.27
Copper	1.0÷1.3×10¹¹ (1.45÷1.9×10⁷)	0.34
Tin bronze	0.74÷1.22×10¹¹ (1.1÷1.8×10⁷)	0.32÷0.35
Brass	0.98÷1.08×10¹¹ (1.4÷1.6×10⁷)	0.32÷0.34
Aluminum alloy	0.7×10¹¹ (1.0×10⁷)	0.33
Magnesium alloy	0.4÷0.44×10¹¹ (5.8÷6.4×10⁶)	0.34
Nickel	2.5×10¹¹ (3.6×10⁷)	0.33
Titanium	1.16×10¹¹ (1.7×10⁷)	0.32
Lead	0.15÷0.2×10¹¹ (2.2÷2.9×10⁶)	0.42
Zinc	0.78×10¹¹ (1.1×10⁷)	0.27
Glass	4.9÷5.9×10¹⁰ (7.1÷8.5×10⁶)	0.24÷0.27
Concrete	1.48÷2.25×10¹⁰ (2.1÷3.3×10⁶)	0.16÷0.18
Wood (along the grain)	8.8÷15.7×10¹⁰ (12.8÷22.8×10⁶)	-
Wood (across the grain)	3.9÷9.8×10¹⁰ (5.7÷14.2×10⁶)	-
Nylon	1.03×10¹⁰ (1.5×10⁶)	-

OTHER CALCULATORS

AREA MOMENTS OF INERTIA

BEAM CALCULATORS

TORSION OF BARS

CIRCULAR FLAT PLATES

BUCKLING

ELASTIC CONTACT

IMPACT LOADS

NATURAL FREQUENCIES

PRESSURED SHELLS

FLUID DYNAMIC

COMPOSITES

SPRINGS

THREAD CONNECTIONS

SHAFT CONNECTIONS

BEARINGS

DRIVES

FATIGUE

HEAT TRANSFER