Natural Frequencies Calculators

Vibration Frequency of a Rectangular Plate with Simply Supported Edges

In this calculation, a rectangular plate with the dimensions a × b, thickness s, and own mass m is considered. The plate edges are simply supported. For the calculation, the elastic modulus E and Poisson's ratio ν of the plate should be specified. As a result of calculations, the natural vibration frequency of the plate f is determined for the first vibration mode.

Natural frequency of rectangular plate with simply supported edges

Calculation of Natural frequency of rectangular plate with simply supported edges

INITIAL DATA

a - Length of the plate;

b - Width of the plate;

s - Plate thickness;

m - Plate weight;

E - Young's modulus;

ν - Poisson's ratio.

RESULTS DATA

f - First mode frequency.

Metric Imperial

Length (a)

Width (b)

Thickness (s)

Plate mass (m)

Young's modulus (E)

Poisson's ratio (ν)

Natural frequency (f)

BASIC FORMULAS

Natural frequency of the first mode:

f = [π²*[1 + (b/a)²]]*[[Es³ / 12(1 - ν²)]*[a/(m*b³)]]^0.5

INITIAL DATA

a - Length of the plate;

b - Width of the plate;

s - Plate thickness;

m - Plate weight;

E - Young's modulus;

ν - Poisson's ratio.

RESULTS DATA

f - First mode frequency.

MATERIALS PROPERTIES

Material	Young’s modulus Pa (psi)	Poisson’s ratio
Steel	1.86÷2.1×10¹¹ (2.7÷3.05×10⁷)	0.25÷0.33
Cast iron	0.78÷1.47×10¹¹ (1.1÷2.1×10⁷)	0.23÷0.27
Copper	1.0÷1.3×10¹¹ (1.45÷1.9×10⁷)	0.34
Tin bronze	0.74÷1.22×10¹¹ (1.1÷1.8×10⁷)	0.32÷0.35
Brass	0.98÷1.08×10¹¹ (1.4÷1.6×10⁷)	0.32÷0.34
Aluminum alloy	0.7×10¹¹ (1.0×10⁷)	0.33
Magnesium alloy	0.4÷0.44×10¹¹ (5.8÷6.4×10⁶)	0.34
Nickel	2.5×10¹¹ (3.6×10⁷)	0.33
Titanium	1.16×10¹¹ (1.7×10⁷)	0.32
Lead	0.15÷0.2×10¹¹ (2.2÷2.9×10⁶)	0.42
Zinc	0.78×10¹¹ (1.1×10⁷)	0.27
Glass	4.9÷5.9×10¹⁰ (7.1÷8.5×10⁶)	0.24÷0.27
Concrete	1.48÷2.25×10¹⁰ (2.1÷3.3×10⁶)	0.16÷0.18
Wood (along the grain)	8.8÷15.7×10¹⁰ (12.8÷22.8×10⁶)	-
Wood (across the grain)	3.9÷9.8×10¹⁰ (5.7÷14.2×10⁶)	-
Nylon	1.03×10¹⁰ (1.5×10⁶)	-

OTHER CALCULATORS

AREA MOMENTS OF INERTIA

BEAM CALCULATORS

TORSION OF BARS

CIRCULAR FLAT PLATES

BUCKLING

ELASTIC CONTACT

IMPACT LOADS

NATURAL FREQUENCIES

PRESSURED SHELLS

FLUID DYNAMIC

COMPOSITES

SPRINGS

THREAD CONNECTIONS

SHAFT CONNECTIONS

BEARINGS

DRIVES

FATIGUE

HEAT TRANSFER